Sonoff is a line of smart power control equipment, which can be integrated with EVA ICS.
EVA ICS can work only with Sonoff equipment running Tasmota firmware.
All Sonoff equipment is controlled via 2 PHI modules:
- sonoff_basic all Sonoff single-port equipment
- sonoff_mch all Sonoff multi-port equipment
For the initial integrations, we recommend simple MQTT server mosquitto, which is included in all popular Linux distributions and is very easy to configure.
Let’s configure notifier if it doesn’t exists yet. Consider we have MQTT server setup on IP 192.168.100.1 with username eva and password 123:
eva ns uc create eva_1 mqtt:eva:email@example.com eva ns uc test eva_1 eva ns uc enable eva_1 # restart controller if everything is okay eva uc server restart
After MQTT server / notifier is set up, configure Sonoff connection to MQTT server and set the control / monitoring topic, e.g. to equipment/sonoff1. We’ll use in this example notifier named eva_1, which is default notifier in EVA ICS controllers. If you use different notifier ID, it should be specified in n config param of PHI module.
Let’s connect the single-port Sonoff to Universal Controller:
eva uc phi download https://get.eva-ics.com/phi/relays/sonoff_basic.py eva uc phi load sonoff1 sonoff_basic -c t=equipment/sonoff1 -y # create unit eva uc create unit:lights/lamp1 -y # assign driver # note: if sonoff_mch module is used, you must also specify "-c port=N" # param, where N is port number eva uc driver assign unit:lights/lamp1 sonoff1.default -y # enable unit actions eva uc action enable unit:lights/lamp1