EVA ICS can work with Philips Hue via Hue bridge.
Connect LEDs to Hue bridge.
In EVA ICS all LEDs have common single format, where unit status is 0 for OFF, 1 for ON and unit value is 24-bit hexadecimal color code.
Philips Hue uses XYB palette which can not be properly converted back to hexadecimal RGB. For that reason, only unit status (0/1) is updated in case if Hue LED is additionally controlled by 3rd party or native Philips app.
Let’s connect the bulb to Universal Controller:
eva uc phi download https://get.eva-ics.com/phi/lights/philips_hue_leds.py # PHI module for Philips Hue supports "discover" command, so we can discover # the bridge in network to obtain its IP eva uc phi discover philips_hue_leds # consider the bridge has IP address 192.168.1.100. To make a link between # PHI and Hue Bridge, you must either specify "user" configuration param or # press "link" button on Hue bridge and load PHI within 30 seconds. eva uc phi load hue1 philips_hue_leds -c host=192.168.1.100 -y # create unit eva uc create unit:lights/lamp1 -y # list available PHI ports eva uc phi ports hue1 # assign driver, e.g. to port 1 eva uc driver assign unit:lights/lamp1 hue1.default -c port=1 -y # enable unit actions eva uc action enable unit:lights/lamp1 # turn the bulb on and set it to, e.g. red: eva uc action exec unit:lights/lamp1 1 -v "#FF0000" -w 5
PHI tries to delete specified (or created) user, when unloading.