Yeelight is an affordable LED bulb with remote control via WiFi, which can be integrated with EVA ICS.
Firstly, bulb LAN control must be turned on (see https://www.yeelight.com/en_US/developer for more info).
After, corresponding EVA ICS PHI module can be loaded and assigned to unit.
In EVA ICS all LEDs have common single format, where unit status is 0 for OFF, 1 for ON and unit value is 24-bit hexadecimal color code.
Yeelight works in 2 modes: default (yellow-white) and color. If white color tone hex code is set to unit value, PHI module uses bulb API methods to put it in default mode and control brightness/temperature only, otherwise color mode is set and color LEDs are used.
Let’s connect the bulb to Universal Controller:
eva uc phi download https://get.eva-ics.com/phi/lights/yeelight.py # PHI module for Yeelight supports "discover" command, so we can discover # the bulb in network to obtain its IP eva uc phi discover yeelight # consider the bulb has IP address 192.168.1.100 eva uc phi load ye1 yeelight -c host=192.168.1.100 -y # create unit eva uc create unit:lights/lamp1 -y # assign driver eva uc driver assign unit:lights/lamp1 ye1.default -y # enable unit actions eva uc action enable unit:lights/lamp1 # turn the bulb on and set it to, e.g. red: eva uc action exec unit:lights/lamp1 1 -v "#FF0000" -w 5
PHI module has additional configuration param smooth=T, where T is time in milliseconds.